A3 SISER PS ELECTRIC
Product Information
Siser P.S. Electric is the film to go to when you want to give your design or logo that extra pop! The Electric range is just like P.S. Film in that it is easy to weed, has a pressure sensitive backing and can be used for multi-layered designs.
REACH compliant
Certified Oeko-Tex® Standard 100 Class I
Cirtified VeganOK
See Downloads below for Data sheet & Cutter settings
*Colours are a guide only.
*Sold by the sheet.
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
| Available widths | A3 |
|---|---|
| Adheres to | Cotton, Polyester, Poly/cotton blends, Not suited for treated and dye sublimated textiles |
| Heat Application | Pre-heat for 2-3 seconds, 150 Degrees, 15 Seconds, Medium Pressure, Peel Hot or Cold |
| Specification | 90 Micron, Adhesive polyester carrier, Blade: 45 deg |
| Washing | Wait 24hrs before washing, Up to 60 degree washability - inside-out, OK to tumble dry, - Cotton cycle, Do not dry clean, No bleach or aggressive chemicals, Can iron inside-out |
Roland GX/GS-24: Blade: 45° Gram Force: 180-190 Offset: .250 Speed: 30 cm/s
Cricut: Blade: Standard Setting: Iron-on+
Silhouette Cameo: Blade: Standard, 4 Material: Heat Transfer, Smooth Speed: 8 Force: 11
Brother ScanNCut: Blade: Standard, 3 Cut Speed: 1 Cut Pressure: 5
• Set iron dial between Cotton and Linen
• Cover design with Kraft Paper or Heat Transfer Cover Sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15-20 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier warm
Continue Shopping
