A3 SISER GLITTER 2
Product Information
A3 Siser Moda Glitter 2 comes in 40 dazzling colours, maximum sparkle without shedding any glitter flakes. Glitter 2 has a pressure sensitive backing, 350 microns thick and is recommended to use a 45°/60° blade. The White Glitter 2 can be Dye Sublimated onto directly. See video tab below. No not layer this product.
REACH compliant
Certified Oeko-Tex® Standard 100 Class I
VeganOK certified
See Downloads below for Data sheet, Colour guide & Cutter settings
*Colours are a guide only.
*Sold by the sheet.
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
| Available widths | A3 |
|---|---|
| Adheres to | Cotton, Polyester, Poly/cotton blends, Not suited for treated and dye sublimated textiles |
| Heat Application | Pre-heat for 2-3 seconds, 160 Degrees, 15 Seconds, Medium Pressure, Peel Hot or Cold |
| Specification | 350 Micron, Adhesive polyester carrier, Blade: 60 deg |
| Washing | Wait 24hrs before washing, Up to 40 degree washability - inside-out, Do not tumble dry, No bleach or aggressive chemicals, Can iron inside-out |
Roland GX/GS-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s
Cricut: Blade: Standard Setting: Iron-on
Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4
Brother ScanNCut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 4
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• Peel carrier hot or cold
Continue Shopping
