Product Information

Colorprint PU gloss will bring your design to live with vibrant graphics, this lightweight, durable heat transfer film is this and stretchable that is also available in a Matt finish. Colorprint PU is easy to use and suitable for a range of garments from cotton to spandex!

*Please see printing profiles in downloads for compatible printers

REACH compliant
Certified Oeko-Tex® Standard 100 Class I
Certified for print with HP Latex inks
VeganOK certified 

Starting at $12.00 Regular Price $20.03
Prices exclude GST.

We deliver all over Australia! 
Check our FAQ's for lead times.

Customer Service

Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.

More Information
Available widths 750mm, 500mm
Finishes Gloss
Specification 80 Micron, Adhesive polyester carrier
Adheres to Cotton, Lycra/Spandex, Poly/cotton blends, Polyester, Cotton, Elastan blends, 100% Polyester, Not suited for treated and dye sublimated textiles
Heat Application Pre-heat for 2-3 seconds, 155 Degrees, 15 Seconds, Medium Pressure, Peel Hot
Washing Wait 24hrs before washing, Up to 60 degree washability - inside-out, OK to tumble dry, Do not dry clean, No bleach or aggressive chemicals
Please type the letters and numbers below

What is the best way to mask and apply Colourprint PU?

Please watch the You Tube clip that can be found under the video tab for the best way to mask & apply Colourprint PU.

I have noticed that some times I get dye migration when applying to 100% polyester, is that normal?

Unfortunately some garments that have 100% polyester can have dye migration due to the construction of the garment. If this does happen, then please reduce your heat settings to 145 degrees.

Can I use an iron to apply the film?

We always recommend using a good, solid, reliable heat press. However if you don't have access to one, then please have a look at this You Tube clip for the best way to apply using an iron.

Do I need app tape to apply the film?

Yes you do need app tape. Try our TTD Easy which has been specifically made for Colourprint PU!

What blade should I use when cutting this film?

A standard blade will be fine. However for best results, we always recommend the 5025 blade over the 1005 blade.

Do I need to out gas the product before applying the transfer to the garment?

No, unlike most of the other products on the market, Colorprint PU does not require out gassing.

Is the film available in matt?

Yes, we do have a matt alternative here.

Can I multi-layer the films?

Yes you can.

What are the care instructions?

Please wait 24 hours before the first wash, then you can wash up to 60 degrees. Unfortunately the product can not be dry cleaned. For best results, always wash inside out.

Can I apply Colorprint PU to nylon or stretchy fabrics?

You can apply it to stretchy fabrics but unfortunately you can't apply it to nylon. Try our Colorprint Extra for nylon garments.

If the transfer won't adhere to the garment after you've heat pressed it then please check the following;

1) Do you have the correct heat? 155 degrees is required for Colorprint PU.
2) Do you have the correct time? 15 seconds is required for Colorprint PU.
3) Do you have the correct pressure? A light to medium pressure is required for Colorprint PU.
4) Do you have a reliable heat press? Some heat presses give off an inconsistent heat which can effect the transfer adhering properly.
5) Have you checked for seams, collars or buttons getting in the way? If these things are in the way, then this effects the pressure which in turn effects the transfer adhering correctly. It could be a good idea to invest in some heat transfer pillows as this will help to avoid these things.
6) Are you applying the transfer to a nylon or coated polyester? If applying to either of these fabrics, the coating can effect the transfer adhering to the garment.