SISER DIGI BRICK
Product Information
Siser Digi Brick is a 750 micron printable material that will give you that extra dimension to your design! Printable with Solvent, Eco Solvent and UV based inks.
- 750 micron
- 3D effect
- Printable with Solvent, Eco Solvent and UV based inks
- Use COLORPRINT PU MATT profile
- For best results Preheat the under platen for 20 seconds at 155ºC
For designs with multiple pieces which need to be kept aligned, use TTD Easy and follow these steps:
- Heat apply 5 sec. at 155°C
- Peel TTD Easy hot
- Cover the print with parchment paper
- Heat apply 20 sec. at 155°C
REACH compliant
Certified Oeko-Tex® Standard 100 Class I
Certified VeganOK
*Images are a guide only
*Sold by the metre
*500mm wide
Special Price
$23.95
Regular Price
$34.33
Prices exclude GST.
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
| Available widths | 500mm |
|---|---|
| Specification | 750 Micron, Non adhesive polyester carrier, Blade: 60 deg |
| Adheres to | Cotton, Polyester, Poly/cotton blends, Not suited for treated and dye sublimated textiles |
| Heat Application | Pre-heat lower platen for 20 seconds, 155 Degrees, 25 Seconds, Medium Pressure, High pressure, Peel Hot |
| Washing | Wait 24hrs before washing, Up to 60 degree washability - inside-out, OK to tumble dry, - Cotton cycle, Do not dry clean, Can iron inside-out |