SISER S-PRINT
Product Information
Siser S-Print is an 85 micron, water based heat transfer material that allows quick and easy printing, using the Soft Print Color Matt profile. Allow print to dry for at least 15 minutes before weeding. S-Print has a low application temperature of 120 degrees with a short pressing time of 5 or 10 seconds depending on the textile weight. (see below)
Excellent workability and a soft touch equals great results in a matter of seconds. Siser TTD Easy application tape used in conjunction with S-Print.
Printable with wide format printers using Solvent, Eco Solvent and UV based inks.
Please note:
- Textile weight of ≤ 160g/m²
- 5 seconds at 120°C
- Medium pressure
- Textile weight of > 160g/m²
- 10 seconds at 120°C
- Medium pressure
- Peel TTD Easy application tape while hot.
REACH compliant
Certified Oeko-Tex® Standard 100 Class I
Certified VeganOK
*Sold by the metre
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
| Available widths | 500mm, 750mm |
|---|---|
| Specification | 85 Micron, Non adhesive polyester carrier, Blade: 45 deg |
| Adheres to | Cotton, Polyester, Lycra/Spandex, Poly/cotton blends, Not suited for treated and dye sublimated textiles |
| Heat Application | Pre-heat for 2-3 seconds, 120 degrees, 5 - 10 Seconds, Medium Pressure, Peel Hot |
| Washing | Wait 24hrs before washing, Up to 40 degree washability - inside-out, OK to tumble dry, - Cotton cycle, Do not dry clean, Can iron inside-out |