COLORPRINT

Product Information

Our original glossy digital material is still a worldwide favorite! Colorprint has a great opacity that blocks most dye migration and is perfect for matching pantones.

Available in 500mm and 750mm wide by the metre.
Or in a pack: Colorprint 750mm x 25mts with a roll of TTD Easy application tape 750 x 25mt

*Please note: Not compatible with Roland VG, TrueVIS inks.

The product is REACH compliant.
The product is certified for print with HP Latex inks .
The product is VeganOK certified.

Starting at $30.02
Prices exclude GST.

We deliver all over Australia! 
Check our FAQ's for lead times.

Customer Service

Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.

More Information
Available widths 500mm, 750mm
Finishes Gloss
Specification 170 Micron
Adheres to Cotton, Polyester, Lycra/Spandex, Poly/cotton blends, Polyester, Cotton, Elastan blends, Not suited for treated and dye sublimated textiles
Heat Application Pre-heat for 2-3 seconds, 150 Degrees, 15 Seconds, Medium Pressure, Peel Hot
Washing Wait 24hrs before washing, Up to 60 degree washability - inside-out, Do not tumble dry, Do not dry clean, No bleach or aggressive chemicals
You're enquiring:COLORPRINT
Please type the letters and numbers below

Can I use an iron to apply the film?
Unfortunately you can't use an iron to apply the film. It's best to use a reliable heat press and follow the time, temperature and pressure settings accordingly.
What blade should I use when cutting this film?
A standard blade will be fine.
Do I need to out gas the product before applying the transfer to the garment?
Yes, the print requires at least 12 hours of out gassing before application. To avoid this, we recommend using Colorprint PU.
Do I need app tape to apply the film?
Yes you do need app tape. Try our TTD Easy which has been specifically made for Colorprint!
Can I multi-layer the films?
Yes you can.
What are the care instructions?
Please wait 24 hours before the first wash, then you can wash up to 60 degrees. Unfortunately the product can not be dry cleaned.
If the transfer won't adhere to the garment after you've heat pressed it then please check the following;
1) Do you have the correct heat? 150 degrees is required for Colorprint. 
2) Do you have the correct time? 15 seconds is required for Colorprint. 
3) Do you have the correct pressure? A light to medium pressure is required for Colorprint. 
4) Do you have a reliable heat press? Some heat presses give off an inconsistent heat which can effect the transfer adhering properly. 
5) Have you checked for seams, collars or buttons getting in the way? If these things are in the way, then this effects the pressure which in turns effects the transfer adhering correctly. 
6) Are you applying the transfer to a nylon or coated polyestor? If applying to either of these fabrics, the coating can effect the transfer adhering to the garment.