METAMARK MD3 REMOVABLE

Product Information

MD3R is a removable is available in gloss white or matt white, an inermediate calendered vinyl that will provide excellent prints when printed with solvent inks. The 70 micron vinyl can be cleanly removed for up to 6 months, making it ideal for temporary signage on vehicles or promotional signage. Matching overlaminate is the MG300 Series

Features:

  • 70 micron
  • Gloss or Matt White - Removable
  • Removable clear solvent-free acrylic
  • Layflat kraft liner with PE coating
  • Up to 1yr durabiliy
  • Suitable for use on Solvent and Eco Solvent inkjet printers
  • Avoid cutting flush to the print, allow a clear border
  • Dry application only

More information in the FAQ tab below.

Prices exclude GST.
Grouped product items
Product Name Qty
METAMARK MDR3 REM /WHITE 1370MMX50MT
$358.96
METAMARK MDR3 REM /WHITE 1520MMX50MT
$435.77
METAMARK MDR3 REM /WHITE 760MMX50MT
$258.51
M/MARK MDR3-301M MATT WHITE REM 1370x50M
$400.46

We deliver all over Australia! 
Check our FAQ's for lead times.

Customer Service

Talk to an expert. We're on hand to help with any of your questions 8.30am-5pm,
Monday to Friday.
Call our team on 1300 364 687.

You're enquiring:METAMARK MD3 REMOVABLE
Please type the letters and numbers below

Face Film:

  • Face Film Calendered PVC 
  • Gauge 70 micron nominal

Adhesive Type:

  • MD3-R-Gloss and Matt - Removable clear solvent-free acrylic. 

Release Liner:

  • Print ‘Metamark Digital Vinyl’ blue print
  • Weight 140 gsm nominal
  • Type Layflat kraft with PE coating

Printing and Handling:

  • Suitable for use on Solvent and Eco Solvent inkjet printers. Always perform a test print first.
  • Ensure that the correct profiles and heater settings are used. Most profiles are available for download from www.metamark.co.uk.
  • Ensure that the material has reached room temperature and a relative humidity of 50% before printing.
  • Do not handle the face film directly and ensure it is free from dust and static.

Application:

  • Ideal for temporary vehicle graphics, promotions and advertising. It is suitable for application to high energy surfaces such as steel and glass.
  • Can be removed cleanly for up to 6 months after application
  • Avoid cutting flush to the print, allowing a clear border is recommended.
  • Apply unstressed. It is not suitable for application over rivets or into recesses.
  • Apply MD3-R-200 using a dry application. This product has a low tack, waterbased adhesive.
  • Not recommended for use on low energy surfaces such as polypropylene, embossed surfaces, emulsion walls or textured plastics.
  • The user should determine suitability of substrate.

Overlaminating:

  • Overlamination is recommended to prevent abrasion and to extend colour fastness.
  • Allow the inks to cure before overlaminating, this is usually 24-48 hours.
  • The matched laminate for MD3-R is MetaGuard 300. For all other laminates the user should determine suitability.

Durability:

  • External weathering 1 year  (unprinted - European conditions)