METAMARK MD5 B/O WHITE PACKS
Product Information
Metamark MD5BO is a gloss white blockout digital film. Offering a high level of performance for medium to long term indoor, outdoor and general signage applications. MD5BO has a grey blockout adhesive to increase opacity and can be applied to most flat or simple curved surfaces. Outstanding print performance with Solvent, Eco Solvent, Latex & UV inkjet printers.
Packs include matching overlaminate for extra UV protection. MG702 - Matt, MG703 - Satin, MG705 - Gloss
Features:
- 70 micron -White Gloss - Blockout
- Permanent grey solvent-based acrylic adhesive
- Layflat kraft liner with PE coating
- Outstanding print performance
- Applications to flat or slightly curved surfaces
- Suitable for wet application
- Up to 5 year durability
More information in the FAQ tab below.
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
Adhesive:
- Permanent grey solvent-based acrylic
Release Liner:
- Print ‘Metamark Digital Vinyl’ grey print
- Weight 140 gsm nominal
- Type Layflat kraft with PE coating
Printing and Handling:
- Suitable for use on Solvent, Eco Solvent, Latex and U.V. inkjet printers. Always perform a test print first.
- Ensure that the correct profiles and heater settings are used. Most profiles are available for download from www.metamark.co.uk.
- Ensure that the material has reached room temperature and a relative humidity of 50% before printing.
- Do not handle the face film directly and ensure it is free from dust and static.
- Finish Available: MG-705 Gloss, MG-703 Satin, MG-702 Matt
- Face Film: Polymeric calendered PVC
- Gauge: 70 micron nominal
- Adhesive Type: Permanent clear pressure sensitive solvent-based acrylic with UV inhibitors
- Release Liner: Print ‘Metamark Digital Vinyl’ grey print
- Weight: 140 gsm nominal
- Type: Kraft paper with high internal strength and PE coating
- External weathering: 7 years (European conditions
Overlaminating:
- Overlamination is recommended to prevent abrasion and to extend colour fastness.
- Allow the inks to cure before overlaminating, this is usually 24-48 hours.
- The matched laminate for MD5-B is MetaGuard 700. For all other laminates the user should determine suitability.
Application:
- Allow the inks to cure before cutting flush to the print, this is usually 24-48 hours.
- Apply unstressed, in particular to curves and recesses. It is not suitable for application over rivets or complex recesses.
- Suitable for wet application. Always apply dry into recesses, and where the print is cut flush, to ensure best adhesion.
- Not recommended for use on low energy surfaces such as polypropylene. The user should determine suitability of substrate
Durability:
- 7 years - (unprinted - European conditions)