METAMARK P/CUT GLOSS WHITE
Product Information
MDPG is a promotional gloss white digital film. MDPG is a 100 micron short life (up to 2 years) film which has been specially designed for more firmness for applications for example labels and large flat panels.
More information in the FAQ tab below.
Starting at
$255.71
Prices exclude GST.
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
Face Film Face Film:
- Monomeric calendered PVC
- Gauge: 100 micron nominal
- Tensile Strength 60N/25mm MD / 52N/25mm TD nom.
- Elongation at break 180% MD nominal
Adhesive Type:
- Permanent solvent-based acrylic
Release Liner:
- Weight 140 gsm nominal
- Type Layflat kraft paper with PE coating
Handling and Printing Guidelines
- Ensure that the material has reached room temperature and a relative humidity of 50% before printing.
- Do not handle the face film directly and ensure it is free from dust and static.
- Suitable for use on Solvent, Eco Solvent, UV and Latex printers. Always perform a test print first.
- Ensure that the correct profiles and heater settings are used. Most profiles are available for download from www.metamark.co.uk.
Overlaminating
- Overlamination is recommended to prevent abrasion and to extend colour fastness.
- Allow the inks to cure before overlaminating, this is usually 24-48 hours.
- The matched laminate for MDP is MetaGuard 305 or 302. For all other laminates the user should determine suitability. Application
- Allow the inks to cure before cutting or overlaminating, usually 24-48 hours. Perform cut path as separate operation to avoid edge curl.
- Not recommended for use on low energy surfaces. The user should determine suitability of substrate, refer to the web site.
Durability:
- 4 years outdoors - (unprinted - European conditions)
Continue Shopping
