Product Information

Siser Moda Glitter is Siser's orginal glitter heat transfer film. It comes on a non adhesive backing. The big advantage is that it has an infused laminate which makes it smoot to touch, with a glossy look.

Very Limited stock available
While stocks last.
Can not be ordered in, once it has gone, it has gone!
No returns on clearance items.

See Downloads below for Data sheet, Colour guide & Cutter settings

*Colours are a guide only.
*Sold by the metre.

Starting at $25.94
Prices exclude GST.

We deliver all over Australia! 
Check our FAQ's for lead times.

Customer Service

Talk to an expert. We're on hand to help with any of your questions 8.30am-5pm,
Monday to Friday.
Call our team on 1300 364 687.

More Information
Available widths 500mm
Finishes Gloss
Adheres to Cotton, Polyester, Poly/cotton blends
Heat Application Pre-heat for 2-3 seconds, 150 Degrees, 15 Seconds, Medium Pressure, Peel cold
Specification 320 Mircon, Adhesive polyester carrier
Washing Wait 24hrs before washing, Up to 30 Degree washability - inside-out, Do not tumble dry, Do not dry clean, No bleach or aggressive chemicals
You're enquiring:MODA GLITTER
Please type the letters and numbers below

Can I use an iron to apply the film?
We always recommend using a good, solid, reliable heat press. However if you don't have access to one, then please have a look at this You Tube clip in the Video tab for the best way to apply using an iron.
What blade should I use when cutting this film?
A standard blade will be fine. However for best results, we always recommend the 5025 blade over the 1005 blade.
Do I need app tape to apply the film?
No, you do not need app tape, just cut the film in reverse using a vinyl cutter and then use it's own backing to apply.
Can I multi-layer the films?
Yes you can, but unfortunately Videoflex Glitter needs to be the final layer.
What are the care instructions?
Please wait 24 hours before the first wash, then you can wash up to 30 degrees. Unfortunately the product can not be dry cleaned. Wash inside out for best results.
Can I apply Videoflex Glitter to nylon or stretchy fabrics?
Unfortunately you can't. But one way to get around it with nylons, is to apply P.S. Extra first and then apply Videoflex Glitter over the top.
If the transfer won't adhere to the garment after you've heat pressed it then please check the following;
1) Do you have the correct heat? 150 degrees is required for Videoflex Glitter. 
2) Do you have the correct time? 15 seconds is required for Videoflex Glitter. 
3) Do you have the correct pressure? A light to medium pressure is required for Videoflex Glitter. 
4) Do you have a reliable heat press? Some heat presses give off an inconsistent heat which can effect the transfer adhering properly. 
5) Have you checked for seams, collars or buttons getting in the way? If these things are in the way, then this effects the pressure which in turn effects the transfer adhering correctly. It could be a good idea to invest in some heat transfer pillows as this will help to avoid these things.
6) Are you applying the transfer to a nylon or coated polyestor? If applying to either of these fabrics, the coating can effect the transfer adhering to the garment.