SISER EASY PUFF 300MM
Product Information
Siser Easy Puff is a Heat Transfer Vinyl that has a textured 3D appearance that can puff up to triple the height when heat pressed. Puff is easy to cut, weed and apply and will add appeal to your design.
Great for simple shapes and large elements since the small cavities will get swelled up in the puffing process.
- 140 Microns
- Press Temp - 138°C
- Press Time - 10 to 15 seconds
- Firm Pressure
- Peel Hot
- Highly recommend to perform a test before launching a production
Please Note:
- Cut the glossy side and mirror cut design (Matte side down)
- Puff is designed to withstand ONLY ONE HEAT APPLICATION. Repeated applications will flatten the puff effect permanently.
- It is not recommended to apply this material with a home iron.
- Texture of applied material can vary from lightly textures to heavily textured.
- For best results use a kraft cover sheet or baking paper - avoid using Teflon sheets.
Starting at
$23.10
Prices exclude GST.
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
Available widths | 300mm |
---|---|
Finishes | Matt |
Adheres to | Cotton, Polyester, Poly/cotton blends |
Heat Application | Pre-heat for 5 seconds, 138 Degrees, 10 - 15 Seconds, High pressure, Peel Hot |
Specification | 140 Micron, Adhesive polyester carrier, Blade: 45 deg |
Washing | Wait 24hrs before washing, Cold wash / mild detergent - inside-out, OK to tumble dry, No bleach or aggressive chemicals, Do not iron |