SISER FOIL

Product Information

Siser Foil has a metallic aspect, but not a chrome look, it has a much better life span the chrome films on the market as it is softer and more plyable. It's also much easier to cut & weed compared to the chrome films.

REACH compliant
Certified Oeko-Tex® Standard 100 Class I
Certified VeganOK

See Downloads below for Data sheet, Colour guide & Cutter settings

*Colours are a guide only.
*Sold by the metre.
*Full roll length is 25mts

Starting at $27.24
Prices exclude GST.

We deliver all over Australia! 
Check our FAQ's for lead times.

Customer Service

Talk to an expert. We're on hand to help with any of your questions 8.30am-5pm,
Monday to Friday.
Call our team on 1300 364 687.

More Information
Available widths 500mm
Adheres to Cotton, Polyester, Poly/cotton blends, Not suited for treated and dye sublimated textiles
Heat Application Pre-heat for 2-3 seconds, 135 Degrees, 15 Seconds, Medium Pressure, Peel Hot
Specification 80 Micron, Adhesive polyester carrier
Washing Wait 24hrs before washing, Up to 30 Degree washability - inside-out, Do not tumble dry, Do not dry clean, No bleach or aggressive chemicals, Do not iron
You're enquiring:SISER FOIL
Please type the letters and numbers below

Can I use an iron to apply the film?
We always recommend using a good, solid, reliable heat press. However if you don't have access to one, then please have a look at this You Tube clip for the best way to apply using an iron.
Do I need app tape to apply the film?
No, you do not need app tape, just cut the film in reverse using a vinyl cutter and then use it's own backing to apply.
What blade should I use when cutting this film?
A standard blade will be fine. However for best results, we always recommend the 5025 blade over the 1005 blade.
Can I multi-layer the films?
Unfortuantely you are unable to multi-layer the Foil.
What are the care instructions?
Please wait 24 hours before the first wash, then you can wash up to 40 degrees. Unfortunately the product can not be dry cleaned. For best results, wash inside out.
Can I apply Foil to nylon or stretchy fabrics?
Unfortunately you are unable to apply the Foil to nylon or stretchy fabrics.
If the transfer won't adhere to the garment after you've heat pressed it then please check the following;
1) Do you have the correct heat? 135 degrees is required for Foil. 
2) Do you have the correct time? 15 seconds is required for Foil. 
3) Do you have the correct pressure? A light to medium pressure is required for Foil. 
4) Do you have a reliable heat press? Some heat presses give off an inconsistent heat which can effect the transfer adhering properly. 
5) Have you checked for seams, collars or buttons getting in the way? If these things are in the way, then this effects the pressure which in turn effects the transfer adhering correctly. It could be a good idea to invest in some heat transfer pillows as this will help to avoid these things.
6) Are you applying the transfer to a nylon or coated polyestor? If applying to either of these fabrics, the coating can effect the transfer adhering to the garment.