SISER STRIPFLOCK PRO
Product Information
Stripflock gives you a smooth raised suede like feel to your design, use it in conjunction with PS Film to get a great multi coloured and textured design. Roland 5025 reflective blade is reccomended.
REACH compliant
Certified Oeko-Tex® Standard 100 Class I
Certified VeganOK
See Downloads below for Data sheet, & Cutter settings
*Colours are a guide only.
*Sold by the metre.
*500mm wide.
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
| Available widths | 500mm |
|---|---|
| Adheres to | Cotton, Polyester, Poly/cotton blends, Not suited for treated and dye sublimated textiles |
| Heat Application | Pre-heat for 2-3 seconds, 155 Degrees, 15 Seconds, Medium Pressure, Peel warm |
| Specification | 620 Micron, 650 Micron, Adhesive polyester carrier, Blade: 60 deg |
| Washing | Wait 24hrs before washing, Up to 60 degree washability - inside-out, OK to tumble dry, - Cotton cycle, Do not dry clean, No bleach or aggressive chemicals, Can iron inside-out |
Can I use an iron to apply the film?
We always recommend using a good, solid, reliable heat press.
Do I need app tape to apply the film?
No, you do not need app tape, just cut the film in reverse using a vinyl cutter and then use it's own backing to apply.
What blade should I use when cutting this film?
For best results we recommend using the 5025 blade, for even better results we recommend using the 1715 blade.
Can I multi-layer the films?
Yes you can, however when doing 2 different layers of Strip Flock, the first layer must be applied for 7-8 seconds and the second layer must be applied at around 7-8 seconds also.
What are the care instructions?
Please wait 24 hours before the first wash, then you can wash up to 60 degrees. Unfortunately the product can not be dry cleaned.
Can I apply Strip Flock to nylon or stretchy fabrics?
It's best not too.
If the transfer won't adhere to the garment after you've heat pressed it then please check the following;
1) Do you have the correct heat? 160 degrees is required for Stripflock.
2) Do you have the correct time? 15 seconds is required for Stripflock.
3) Do you have the correct pressure? A light to medium pressure is required for Stripflock.
4) Do you have a reliable heat press? Some heat presses give off an inconsistent heat which can effect the transfer adhering properly.
5) Have you checked for seams, collars or buttons getting in the way? If these things are in the way, then this effects the pressure which in turn effects the transfer adhering correctly. It could be a good idea to invest in some heat transfer pillows as this will help to avoid these things.
6) Are you applying the transfer to a nylon or coated polyestor? If applying to either of these fabrics, the coating can effect the transfer adhering to the garment.
Continue Shopping
