Product Information

MetaCast® MDC is a premium 50 micron cast digital film, giving wrap professional total confidence that they will get ultimate performance on full vehicle wraps. Featuring the MetaGlide adhesive technology, with next generation micro channel air release system, this gives optimal performance with enhanced repositionability, and high adhesive strength. This gives total confidence when fitting into 3D channels and recesses. MDC also offers improved handling with it's layflat stability and smooth release liner. Outstanding print quality, colour gamut and out of the box printer compatibility, through the range of ICC profiles available.
Matching Overlaminate: MetaGuard Cast - a 40 micron, premium high gloss cast overlaminate, that completes the MetaCast wrap system. Available in Gloss or Matt packs.

Photos courtesy of Erebus motorsport wrapped in Metamark MDC by Wrap Studio


  • 50 Micron 
  • Premium cast film
  • MetaGlide micro channel air release adhesive
  • Repositionable, layflat stability, and smooth release handling
  • Outstanding print quality with high gloss
  • For Solvent, Eco Solvent, Latex and UV printing
  • Up to 8yrs outdoor durability

More information in the FAQ tab below.

Starting at $747.30
Prices exclude GST.

We deliver all over Australia! 
Check our FAQ's for lead times.

Customer Service

Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.

Please type the letters and numbers below

Face Film:

  • Face Film: Cast Vinyl   
  • Gau: 50 micron nominal


  • Type: MetaGlide Micro Channel Grey Solvent‐Based Adhesive

Release Liner:

  • Print: ‘MetaGlide’ print 
  • Weight: 140 gsm nominal 
  • Type: Structured micro channel PE layflat

Printing and Handling:

  • For use with Solvent, Eco Solvent, UV and Latex inkjet printers.
  • Always perform a test print first.
  • Ensure that the correct profiles and heater settings are used. Refer to
  • Ensure that the material has reached room temperature and a relative humidity of 50% before printing.
  • Do not handle the face film, ensure free from dust and static.
  • Overlamination is recommended to prevent abrasion, extends colour fastness, and also offers easier handling.
  • Allow the inks to cure before overlaminating, this is usually 24‐48 hours. (Not applicable to HP Latex prints) 
  • The matched laminate for MDC is MetaGuard MGC.


  • Allow a minimum of 24‐48 hours for the solvents to dry off before application of the overlaminate, or to the vehicle, depending on the print and drying conditions this can often be in excess of 48 hours. Retained solvents will reduce adhesion levels 
  • Successful vehicle wrap application requires the necessary techniques. 
  • The product is designed to be used with a dry application, apply up to 80°C heat to soften the film and allow conformability and after application superheat the film into recesses at 85‐90°C. Do not overstretch as this will cause the application to fail.
  • The user should determine suitability of substrate


  • External weathering -10 years (unprinted - European conditions)