Product Information

MDPG is a promotional gloss white digital film. MDPG is a 100 micron short life (up to 2 years) film which has been specially designed for more firmness for applications for example labels and large flat panels.

More information in the FAQ tab below.

Starting at $255.71
Prices exclude GST.

We deliver all over Australia! 
Check our FAQ's for lead times.

Customer Service

Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.

Please type the letters and numbers below

Face Film Face Film:

  • Monomeric calendered PVC
  • Gauge: 100 micron nominal 
  • Tensile Strength 60N/25mm MD / 52N/25mm TD nom. 
  • Elongation at break 180% MD nominal

Adhesive Type:

  • Permanent solvent-based acrylic

Release Liner:

  • Weight 140 gsm nominal
  • Type Layflat kraft paper with PE coating

Handling and Printing Guidelines

  • Ensure that the material has reached room temperature and a relative humidity of 50% before printing.
  • Do not handle the face film directly and ensure it is free from dust and static.
  • Suitable for use on Solvent, Eco Solvent, UV and Latex printers. Always perform a test print first.
  • Ensure that the correct profiles and heater settings are used. Most profiles are available for download from


  • Overlamination is recommended to prevent abrasion and to extend colour fastness.
  • Allow the inks to cure before overlaminating, this is usually 24-48 hours.
  • The matched laminate for MDP is MetaGuard 305 or 302. For all other laminates the user should determine suitability. Application
  • Allow the inks to cure before cutting or overlaminating, usually 24-48 hours. Perform cut path as separate operation to avoid edge curl.
  • Not recommended for use on low energy surfaces. The user should determine suitability of substrate, refer to the web site.


  • 4 years outdoors - (unprinted - European conditions)