Can't make up your mind?

You can now select up to 4 products to do a product comparison. Do a comparison now

Go to product comparison

METAMARK MD5G METAGLIDE WHITE GLOSS PACKS

main product photo

Product Information

New to the range, Metamark MD5G, High performance digital white gloss vinyl with the MetaGlide® air release system. Metalide® offers all round improved handling, with the micro structured air release liner, you can lift and re-apply the print with a smooth clean peel that prevents damage to the graphic. MetaGlide® offers exceptional layflat printablility. Prints can also be stay stored ot loosely rolled confidently, without tunneling or delamination. Not suitable for wet application.

Features:

  • White Gloss - 70 Micron
  • MetaGlide Air release system
  • Matching Overlaminate - MG700 series
  • Outdoor durability up to 5yrs unprinted
  • Printable with Solvent, Eco Solvent, UV and Latex printers
  • Media available separately

More information in the FAQ tab below.

Prices exclude GST.
Grouped product items
Product Name Qty
METAGLIDE PACK (MD-5G/MG-702) 1370MM
$1,094.68
METAGLIDE PACK (MD-5G/MG-702) 1600MM
$1,279.59
METAGLIDE PACK (MD-5G/MG-703) 1370MM
$1,094.68
METAGLIDE PACK (MD-5G/MG-703) 1600MM
$1,279.59
METAGLIDE PACK (MD-5G/MG-705) 1370MM
$1,094.68
METAGLIDE PACK (MD-5G/MG-705) 1600MM
$1,279.59
Add to Product Comparison Add to Wishlist

We deliver all over Australia! 
Check our FAQ's for lead times.

Customer Service

Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.

You're enquiring:METAMARK MD5G METAGLIDE WHITE GLOSS PACKS
Please type the letters and numbers below

Adhesive Type:

  • MetaGlide® Air Release Permanent Solvent-Based Adhesive.

Release Liner Print:

  • Print: ‘MetaGlide®’ print
  • Weight: 140 gsm nominal 
  • Type: Structured Layflat kraft paper with PE coating

Printing and Handling:

  • Suitable for use on Solvent, Eco Solvent, Latex and U.V. inkjet printers. Always perform a test print first. 
  • Ensure that the correct profiles and heater settings are used. Most profiles are available for download from www.metamark.co.uk.
  • Ensure that the material has reached room temperature and a relative humidity of 50% before printing.
  • Do not handle the face film directly and ensure it is free from dust and static.
Overlaminate:
  • Finishes Finish Available: MG-705 Gloss, MG-703 Satin, MG-702 Matt
  • Face Film: Polymeric calendered PVC 
  • Gauge: 70 micron nominal
  • Adhesive Type: Permanent clear pressure sensitive solvent-based acrylic with UV inhibitors
  • Release Liner: Print ‘Metamark Digital Vinyl’ grey print
  • Weight: 140 gsm nominal 
  • Type: Kraft paper with high internal strength and PE coating
  • External weathering: 7 years (European conditions)

Application:

  • Allow the inks to cure before cutting flush to the print. This is usually 24-48 hours. (Not applicable to HP Latex prints)
  • Apply unstressed, in particular to curves and recesses. It is not suitable for application over rivets or complex recesses.
  • Suitable for dry application only.
  • Not recommended for use on low energy surfaces such as polypropylene. The user should determine suitability of substrate. 

Overlaminating:

  • Overlamination is recommended to prevent abrasion and to extend colour fastness.
  • Allow the inks to cure before overlaminating, this is usually 24-48 hours. (Not applicable to HP Latex prints) 
  • The matched laminate for MD5-G is MetaGuard 700. For all other laminates the user should determine suitability

Durability:

  • External weathering: 7 years - (unprinted - European conditions)