METAMARK METAGUARD FLOOR ART
Product Information
MetaGuard FloorArt is a 100 micron textured floor overlaminate offering decor and promotional branding opportunities for short term indoor use. The matt embossed film gives a durable protection to graphics, with easy to clean finish.Having an anti-slip finish tested in accordance with BS 7676-2:2002 certification (Slider 96) and UK Slip Resistance Guidelines and has achieving an R9 rating. Suitable for use with Solvent, Eco Solvent and Latex prints.
- 100 Micron Monomeric Calendered PVC
- Permanent Clear Solvent Based Adhesive
- 140gsm Layflat PE Kraft (Grey Print) Liner
- Suitable for Cold Lamination
- Slip Rating - Category R9
- Matching media - MD3-B and MDP-H
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
Face Film:
- Face Film Monomeric calendered PVC
- Matt embossed
- Gauge 100 micron nominal
Adhesive Type:
- Permanent clear solvent-based acrylic
Release Liner:
- Print: ‘Metamark Digital Vinyl’ grey print
- Weight: 140 gsm nominal
- Type: Layflat kraft with PE coating
Durability:
- Shelf Life 1 years External weathering (Unprinted - European conditions)
- 3 years for use not on floors (walls).
- 1 year under normal floor use (Internal Only)
- Fire Rating Self Extinguishing
- Certification BS 7976-2:2002 cert (Slider 96) DIN 51130:2014 – Category R9
Material Handling:
- Ensure that the material has reached room temperature and a relative humidity of 50% before printing.
- Do not handle the face film directly and ensure it is free from dust and static
Printing Guidelines:
- The recommended matched print media’s for Metamark MDPH or MDPHB.
- Suitable for use on Solvent, Eco Solvent inkjet, UV and Latex prints on Metamark print media.
- Ensure that the correct profiles and heater settings are used. Most profiles are available for download from www.metamark.co.uk
- Allow 24-48 hours after printing for the ink to gain abrasion resistance
Application and Care of Floor Graphics:
- Apply floor graphics using a dry application method, to smooth, flat, sealed surfaces only. Due to the variability of paints and finishes it is recommended to test a sample for adhesion.
- Ensure the floor surface is clean from contamination, dust free, and any painted surface is sound.
- No liability is given for damage to painted surfaces as the bond between the paint and the wall is out of our control.
- Make sure edges are applied well. Allow 24 hours to cure before being exposure to moisture or cleaning.
- Avoid exposure to heavy traffic. If edges of graphics begin lifting, replace graphics immediately to avoid the risk of tripping hazard.
- The product meets slip resistance standards when wet however slip resistance is reduced when wet or dirty.