POLI-FLEX TURBO PRINT BLOCKOUT
Product Information
POLI-FLEX TURBO PRINT 4010-S BLOCKOUT is Sublimation resistant, printable Polyurethane film (white) with a blockout interlayer. Suitable for bright and dark textiles. Is soft to touch and has excellent cutting and weeding attributes, when pressed onto the garment it has a semi-matt finish with high resolution achieved. Quick press time of only 5 seconds at 130° with medium pressure.
TURBO PRINT 4010-S BLOCKOUT is compatible with all current printers using ECO-solvent, solvent and latex inks. The self-adhesive PET film liner allows even filigree motifs to be cut by all current CAD/CAM plotters after printing.
To avoid a sublimationmigration we recommend that the garment is not preheated.
- Semi-matt finish
- 120 Micron
- Soft to touch
- Suitable for light and dark textiles
- Printable with ECO-solvent, solvent and latex inks
- Polyurethane-hotmelt adhesive
- Self-adhesive PET film liner
- Remove application tape whilst warm
*Sold by the metre
*Full roll length is 25mts
*Available in 500mm and 750mm wide
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8am-5pm,
Monday to Friday.
Call our team on 1300 713 567.
| Available widths | 500mm, 750mm |
|---|---|
| Finishes | Satin |
| Specification | 120 Micron, Adhesive polyester carrier |
| Adheres to | Cotton, Polyester, Poly/cotton blends, 100% Polyester |
| Heat Application | 130 Degrees, 5 Seconds, Medium Pressure, Peel warm |
| Washing | Wait 24hrs before washing, Up to 60 degree washability - inside-out, No bleach or aggressive chemicals |