A3 SISER PS FILM
Product Information
Siser P.S. Film is our leading heat transfer vinyl. Having a pressure sensitive backing which makes it easy to cut and weed, and only 90 microns thick the PS Film is great for multi-layered designs. Conect have one of the widest ranges of colours. Need to know more? We have a range of info in the tabs below, FAQ's, downloads as well as You Tube clips. This product is also known as EASY WEED in the United States.
REACH compliant
Certified Oeko-Tex® Standard 100 Class I
Certified VeganOK
See Downloads below for Data sheet, Colour guide & Cutter settings
*Colours are a guide only.
*Sold by the sheet.
We deliver all over Australia!
Check our FAQ's for lead times.
Talk to an expert. We're on hand to help with any of your questions 8.30am-5pm,
Monday to Friday.
Call our team on 1300 364 687.
| Available widths | A3 |
|---|---|
| Adheres to | Cotton, Polyester, Poly/cotton blends, Not suited for treated and dye sublimated textiles |
| Heat Application | Pre-heat for 2-3 seconds, 150 Degrees, 15 Seconds, Medium Pressure, Peel Hot or Cold |
| Specification | 90 Micron, Adhesive polyester carrier, Blade: 45 deg |
| Washing | Wait 24hrs before washing, Up to 80 degree washability - inside-out, OK to tumble dry, - Synthetic cycle, No bleach or aggressive chemicals |
Roland GX/GS-24: Blade: 45° Gram Force: 80-90 Offset: .250 Speed: 25-50 cm/s
Cricut: Blade: Standard Setting: Iron-on
Silhouette Cameo: Blade: Standard, 2 Material: Heat Transfer, Smooth Speed: 8 Force: 4
Brother ScanNCut: Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 4
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover with Heat Transfer Cover Sheet or Multipurpose Paper
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold
Continue Shopping
